What You Will Learn in This Guide
A step-by-step guide for you to set up your iMin devices.
iMin & External Hardware Setup Guide
The link below will guide you through setting up your iMin D1, Falcon 1, and D4 Android registers.
Click here for the setup guide
iMin Falcon 1 User Manual
Refer to the image below for port locations:
1. To turn on the device, press and hold the power button for 3 seconds and let go - the screen should turn on after that
2. If you wish to insert a SIM card into the device, locate the panel beneath the display - push the cover open with your thumb
iMin Falcon 1: Printer User Guide
1. Push the yellow button next to the built-in printer
2. Insert a receipt roll - with the StoreHub logo facing downwards - and unroll a portion of the paper before shutting the printer hatch.
Note: To determine which side of the receipt roll should face up/down, scratch both sides of the paper until you see black markings appear; the side with the markings should face UP when installing.
iMin D1 User Manual
You may refer to the iMin D1 User Manual for further assistance.
iMin D1: Printer User Guide
1. The following is a guide about how to replace the receipt roll in the iMin D1 printer.
iMin D4 User Manual
1. You may refer to the iMin D4 User Manual for further assistance.
iMin D4: Printer User Guide
The following is a guide about how to replace the receipt roll in the iMin D4 printer.
iMin Swan 1 User Manual
Note: Secondary display for iMin Swan 1 is NOT available for now
2. To turn on the device, press and hold the power button for 3 seconds and let go - the screen should turn on after that
Refer to this slide to learn more on Android setup based on your business type: Here