What You Will Learn In This Guide
How to insert a SIM into an iMin D1 or iMin Falcon 1 Android Register.
Important Notes
StoreHub does NOT recommend mobile data as your main source of internet as your connection stability greatly depends on your telco coverage.
Only use a SIM card if you have no access to WiFi or LAN connections (Such as food trucks, market food stalls, or areas with poor wired internet coverage).
When using mobile data, you won't be able to connect to external printers via a LAN cable.
USB connection is possible but with limited cable lengths (shorter is better)
if you experience any slowdown in mobile data speed, please contact your service provider.
How to insert a SIM card into the Android Register
Note: Only the iMin Falcon 1 and D1 support SIM card connection and the standard-sized SIM must be used.
1. Locate the SIM card slot on your Android register:
iMin Falcon 1 (Click to expand)
iMin Falcon 1 (Click to expand)
1. Turn the device over and push open the cover.
iMin D1
iMin D1
1. Turn the device over and using a SIM ejector/pin, eject the SIM card holder shown in the image below.
2. Insert your SIM card into the slots as shown in the image below:
3. Restart your device by long-pressing the power buttons and then selecting "Restart" when the window pops up:
iMin D1 (Click to expand)
iMin D1 (Click to expand)
Min Falcon 1 (Click to expand)
Min Falcon 1 (Click to expand)
4. Check that you've connected to your mobile network by going to the Android settings.
5. Tap on Network & Internet, then tap Mobile Network.
6. When connected, the setting should not be greyed out.
