What You Will Learn In This Guide
A step-by-step guide to set up your Android Register.
Android Sunmi T2 Lite
Sunmi T2 Lite: Setup Register:
1. When unboxing the Register, take out the adapter and wire and connect the small wire head to the circular power port below:
2. On the side of the device's main large screen, you'll see the power button and turn it on by holding the power button for about 1-2 seconds
3. Once turned on, you'll see the main screen of the Android Register.
Notes: Be sure to Activate your Register if you have not done so already.
4. Next, go to the StoreHub app on your Android Register, tap the Menu, then Settings, then tap Printer
5. Toggle on Always Print Receipt
Notes: If you have an external printer connected to your Register via USB, tap Search Printer, then tap the Printer once it appears on the screen
6. After tapping on the printer name, toggle on Receipt, then tap the arrow icon at the top left side of the Register, then tap Print Test Receipt.
7. Your printer should print a test receipt.
Sunmi T2 Lite: Connecting a Cash Drawer
1. Take the RJ11 / phone cable that comes with the cash drawer and attach it to the port as below.
Sunmi T2 Lite: Connecting a Barcode Scanner
1. To connect the barcode scanner, attach the scanner to either of the USB ports:
Android Sunmi T2
Sunmi T2: Setup Register & Built-in Printer
1. When unboxing the Register, take out the adapter and wire and connect the small wire head to the port below:
2. On the bottom right of the device, you'll see the power button and turn it on by holding the blue power button for about 1-2 seconds.
3. Once turned on, you'll see the main screen of the Android Register.
Notes: Be sure to Activate your Register if you have not done so already
4. Next, go to the StoreHub POS app on your Android Register, then tap on the menu Menu, then tap Settings, and Printer.
5. Toggle on Always Print Receipt.
Notes: If you're using the built-in printer with your Android POS, tap Built-in Printer, then choose Receipt.
6. After tapping on the printer name, toggle on Receipt, then tap the arrow icon at the top left side of the Register, tap Print Test Receipt.
7. Your printer should print a test receipt.
Sunmi T2: Connecting a Cash Drawer
Take the RJ11 / phone cable that comes with the cash drawer and attach it to the port as below:
Sunmi T2: Connecting a Barcode Scanner
To connect the barcode scanner, attach the scanner to either of the USB ports:
Android Sunmi D2
Sunmi D2: Setup Register
1. When unboxing the Register, take out the power adapter and wire and connect the small wire head to the circular port below:
2. On the bottom of the device, you'll see the power button and turn it on by holding the blue power button for about 1-2 seconds.
3. Once turned on, you'll see the main screen of the Android Register
Notes: Be sure to Activate your Register if you have not done so already.
4. Next, go to the StoreHub app on your Android Register, go to the Menu, then tap Settings, the Printer
5. Toggle on Always Print Receipt
Notes: If you have an external printer connected to your Register, tap Search Printer, then tap the Printer once you see it on the screen.
6. After tapping on the printer name, toggle on Receipt, then tap the arrow icon at the top left side of the Register. then tap Print Test Receipt
7. Your printer should print a test receipt.
Sunmi D2: Connecting a Cash Drawer
1. Take the RJ11 / phone cable that comes with the cash drawer and attach it to the port as below
Sunmi D2: Connecting a Barcode Scanner
1. To connect the barcode scanner, attach the scanner to either of the USB ports
Android 12C
Android 12C: Setup Register & Built-in Printer
1. When unboxing the Register, take out the adapter and wire and connect it to the power port:
2. On the bottom right of the device, you'll see the blue power button and turn it on by holding it for about 1-2 seconds.
3. Turn on the attached receipt printer by holding down the button on the right for about 3-5 seconds; the green light (left) will appear, and then the red light (right) will light up when powered on:
4. Once turned on, you'll see the main screen of the Android Register.
Notes: Be sure to Activate your Register if you have not done so already
5. Next, set up the built-in printer by pulling down the latch; highlighted in the image below, and placing your receipt roll; the loose part is at the top of the roll.
6. Next, go to the StoreHub app on your Android Register, click on Menu, then Settings, then tap Printer
7. Toggle on Always Print Receipt, then tap Built-in Printer, and choose Receipt.
8. After tapping on the printer name, toggle on Receipt and tap the arrow icon at the top left side of the Register, then tap Print Test Receipt.
9. Your printer should print a test receipt.
Android 12C: Connecting a Cash Drawer
1. Take the RJ11 / phone cable that comes with the cash drawer and attach it to the port that says Cash:
Android 12C: Connecting a Barcode Scanner
1. To connect the barcode scanner, attach the scanner to either of the USB ports found at the side of the printer; where the power button is.
Refer to this slide to learn more on Android setup based on your business type: Here
FAQ
1. What should I do if I am unable to locate the printer?
Ensure that your printer is connected to the router and also StoreHub 5G WiFi as well.
If you're still unable to locate your printer, turn off all devices and turn on your router first.
Wait for it to boot up completely before turning on your POS register and printer.
2. Do I always need to keep Always Print Receipt toggled on?
It depends on your preference. If you don't require a receipt or would like to email customers their receipts, then you may toggle off "Always Print Receipt".